como trabajar con el protobar 14
How to work with the protobar it is incorrectly written and it should be written as "Breadboard" being its meaning: protobar = Breadboard or breadboard Breadboard or breadboard: is today one of the most widely used test plates. It consists of perforated plastic blocks and numerous thin sheets, an alloy of copper, Tin and phosphorus, that unite these holes, creating a series of parallel lines. Lines are cut in the middle of the block to ensure that devices in integrated circuits of type dual in-line package ( DIP ) they can be inserted at right angles and without being touched by the provider to the lines of drivers. On the opposite side stands a backing with adhesive, which serves to seal and keep in place the metal strips.A computer based on the Motorola 68000 with various TTL circuits mounted on a Breadboard arrangement.Due to the characteristics of capacitance ( 2 to 30 PF by 41 contact point; and resistance that tend to have the Breadboard are confined to work at relatively low frequency ( less than 10 or 20 MHz, depending on the type and quality of the electronic components used 41.Other electronic components can be mounted on adjacent holes that do not share the Strip or conductive line and interconnected to other devices using cables, usually one-line. Joining two or more Breadboard it is possible to assemble complex electronic prototypes that have dozens or hundreds of components.